Midi Channel - Samick DCP-12 Manual

Turn Local On/Off to On
Press the [LAYER] button and [DEMO] button at the same time again.
The LCD show:
LAYER DEMO
LOCAL

MIDI Channel

This function allows you to use the Data Control knob (or Transpose Up/Down
buttons) to increase or decrease the Main MIDI Transmit Channel. The Main MIDI
Transmit Channel is the MIDI channel used for the Main Voice.
Change the Main MIDI Transmit Channel
Press the [SPLIT] button and [LAYER] button simultaneously to enter MIDI
Channel Edit Mode.
The display will begin flashing the current Main MIDI Transmit Channel:
SPLIT LAYER
MIDI
CHANNEL
Use the [DATA CONTROL] knob or the [TRANSPOSE] Up or Down buttons
to change the Main MIDI Transmit Channel.
The new Main MIDI Transmit Channel will be selected and shown in the display.
DATA CONTROL
If the keyboard is being played at the time of the MIDI Channel change, all new
notes played will be sent on the new MIDI Channel. All held notes will play
their note off messages on the MIDI Channel on which they were played.
While in MIDI Channel Edit Mode, pressing the Transpose up and down buttons
together will reset the Main MIDI Transmit Channel function back to its default
value of Channel 1.
36