Reverb Effect - Samick DCP-12 Manual

Reverb Effect

The built-in digital Reverb can be used for adding a natural-sounding room
ambience to any of the 16 voices built into DCP-12.
Apply Reverb to a Voice
Press the [REVERB] button.
The button will illuminate, and you will hear the Reverb effect when you play
the currently selected voice.
To turn Reverb off, press the [REVERB] button again. The button will go dark
to indicate that Reverb is off.
Adjust the Reverb Depth
While holding the [REVERB] button, turn the [DATA CONTROL] knob to adjust
the Reverb Depth setting.
The LCD will sho w the current Reverb Depth setting. The minimum setting is 0,
and the maximum setting is 127.
REVERB
Once you have reached the desired amount of Reverb, let go of the Reverb button,
and resume playing DCP-12.
NOTE
If you prefer, you may use the Tempo Up/Down buttons instead of the Data
Control knob to change the Reverb Depth (while holding down the Reverb
button).
REVERB
DATA CONTROL
24