Master Tune - Samick DCP-12 Manual

With Octave Shift Edit Mode enabled, press the [Transpose Up and Down buttons
at the same time.
TRANSPOSE
NOTE
Changes to the Octave Shift setting are not remembered after a power cycle. The
setting will be back at its default value of zero at power-up.

Master Tune

Although DCP-12 never actually slips out of tune, the Master Tuning function
can be helpful when playing along with another instrument that may be tuned
slightly higher or lower than standard pitch.
Adjust the Master Tune Setting
Press the [CHORUS] and [TOUCH] buttons at the same time.
The top line of the LCD will show: MasterTune: -0-
CHORUS
MASTER
TUNE
Use the [DATA CONTROL] knob (or the Transpose Up/Down buttons) to raise
or lower the Master Tune setting.
DATA CONTROL
NOTE
Changes to the Master Tune value are remembered after a power cycle.
Also note that the Master Tune command is sent to the internal sound engine only.
It will not affect MIDI sent from DCP-12 to an external MIDI device or software
program.
TOUCH
21