Time Signature - Samick DCP-12 Manual

Time Signature

The metronome can support the following time signatures:2/2, 2/4, 3/4, 4/4,
5/4, 6/8, 7/8, 9/8, 12/8
Change the Metronome's Time Signature
Press the [DEMO] and [METRONOME] buttons at the same time to enter Time
Signature Edit Mode.
The top line of the LCD will show: Time Sig: 4/4
DEMO
Use the [TRANSPOSE] Up or Down button to change the Time Signature.
You step through the time signatures in the following order: 2/2, 2/4, 3/4, 4/4,
5/4, 6/8, 7/8, 9/8, 12/8
TRANSPOSE
NOTE
After pressing the Demo and Metronome buttons in Step, you will have three
seconds to begin using the Transpose Up or Down buttons (or the Data Control
knob) to change the Time Signature. After three seconds, the piano goes back
to Performance Mode (the basic play the piano setting), and the LCD goes
back to its main screen. This three second
to most of the editing functions of DCP-12.
While in Time Signature Edit Mode, press the [TRANSPOSE] Up and Down
buttons at the same time.
TRANSPOSE
METRONOME
TIME
SIG
28
Time Out function is common