Setup - Samick DCP-12 Manual

You are no doubt eager to play your new DCP-12 instrument, but first please
make sure you have completed the following basic setup steps:
1) Follow the assembly instructions as outlined on page 46 in the appe ndix of
this manual.
2) Once the DCP-12 is securely assembled, connect the plug of the foot pedal
unit to the pedal jack on the rear panel.
AC POWER
CAUTION
3) Plug in the included power chord to the rear of the piano body as illustrated
below. Position the DCP-12 in the desired location, making sure that the
power chord can reach a AC power connection point.
4) Then plug the other end of the power cable into the AC power outlet.
Caution
1.Ensure the piano is turned off when connecting and disconnecting the power.
2.Turn the volume knob to its minimum level before turning on the power

Setup

PEDAL
AC POWER AC POWER
CAUTION CAUTION
4