Metronome; Tempo - Samick DCP-12 Manual

Metronome

The DCP-12 features a build-in metronome which you can use to practice your
timing with. To activate it, simply press the METRONOME button.
You can set both volume, tempo and time signature for the metronome. The
following describes how to adjust each of those functions.
Change the Metronome's Volume
While holding down the [METRONOME] button, turn the [DATA CONTROL]
knob clockwise to increase volume, or counterclockwise to decrease volume.
The LCD will show the current Metronome Volume level. This can be adjusted
between zero (minimum) and 127 (maximum).
When you have set a comfortable level, let go of the [METRONOME] button.
METRONOME

Tempo

The Metronome can be programmed for any tempo between 20 beats per minute
(bpm) and 280 bpm.
Change the Metronome's Tempo
Use the [TEMPO] Up/Down buttons (Up button increases tempo, Down button
decreases tempo).
TEMPO
NOTE
Pressing both Tempo Up/Down buttons simultaneously will reset the
Tempo to its default value of 120 bpm.
DATA CONTROL
27