Factory Reset - Samick DCP-12 Manual

Factory Reset

Performing a Factory Reset will clear all battery backed memory and restore
all functions to their factory defaults, just like they were when you used
DCP-12 for the first time. Please note that anything you have recorded into
the Song Recorder will be erased by this procedure!
Hold down the [REVERB] and [CHORUS] buttons while powering on DCP-12.
REVERB
CHORUS
ON/OFF
PIANO
RESET
The LCD window will light all pixels, and all LEDs on the device will light
while these buttons are held down. Once this has happened, you can release
the Reverb and Chorus buttons.
Once the reset has finished, DCP-12 will return to Performance Mode, allowing
you to play the piano normally again. All button LEDs will return to their default
states. The display window will show the version number of the firmware (the
piano's internal operating system) for 2 seconds and then return to showing the
Voice Name.
DCP-12 will then function normally, as if powered on for the first time.
44