Main Midi Transmit Channel(C#2) - Samick DCP-8 Manual

Press the Local On/Off key (C#3)
The LED display will show:
To turn Local On/Off back on, follow the above procedure again.
The LED display will show:
C0 C1

Main MIDI Transmit Channel(C#2)

Pressing the MIDI Transmit Channel key will set the Data Control knob to
increase or decrease the Main MIDI Transmit channel number.
To change the Main MIDI Transmit Channel:
Press the [Voice/Function] button to enter Function Mode.
Voice / -
Function
Press the MIDI Transmit Channel Key (C#2)
The LED Display will momentarily show:
C2 C3
C#3
C0
35
C1 C2
C#2