Piano Reset - Samick DCP-12 Manual

Piano Reset

As soon as the Piano Reset function is activated (by pressing the Reverb and
Chorus buttons simultaneously), the device will perform the following functions:
1. Turn Local On
2. Send All Notes Off
internal sound engine
3. Send Reset All Controllers
to the internal sound engine
4. Assign Data Control to MIDI Controller 7 (Volume)
5. Set Volume levels for Main Voice, Split Voice and Layer Voice to defaults
6. Set Pan to 64 for Main Voice, Split Voice and Layer Voice
7. Turn off Layer Mode and Split Mode
8. Set Global Transmit Channel to 1
9. Set Transpose and Octave Shift both back to zero
10. Send a Bank Change MSB = 0 and Bank Change LSB = 0 on channel 1
11. Send a Program Change = 0 on channel 1
12. Send the Reverb Depth back to the default value for the Piano Voice
13. Send the Chorus Depth back to the default value for the Piano Voice
14. Send the current status of the Sustain Pedal on channel 1
The device will remain in Performance Mode during the Piano Reset function.
The LCD display will show
the default display.
Command on MIDI Channel 1 - external and to the
Command on MIDI channel 1 - external and
Piano Reset
43
for 1 second and then return to