Metronome - Samick DCP-8 Manual

To Adjust the Reverb Depth (Reverb Amount):
Press and hold the Reverb button; the LED display will change to show the
current Reverb depth.
While holding the Reverb button, turn the Data Controller knob to adjust the
reverb depth setting. The minimum setting is 0, and the maximum setting is 127.
Once you have the desired amount of Reverb, let go of t he Reverb button, and
resume playing the DCP-8.
Each of the eight built-in voices will remember its individual Reverb on/off
status and depth setting, even after turning the Power switch off and on.
Reverb

Metronome

Our DCP-8 features a built-in metronome which can be used for practicing
to a set tempo, and is also helpful when recording tracks in the Song Recorder.
To Activate the Metronome:
The metronome sound is alternately turned on and turned off by pressing
[Metronome] button. The Metronome button's LED will also flash in time.
Metronome Volume
The metronome volume can be raised or lowered to a level that is comfortable
for you.
Chang the Metronome's Volume
Press the [Voice/Function] button on the left hand panel.
Data Control
[Assignable]
Metronome
Voice / -
Function
24