Master Tuning(F#2) - Samick DCP-8 Manual

Use the Data Control knob to select the desired Transpose Value.
Turning the Data Control knob clockwise will raise the keyboard's pitch in
semiton e increments, and turning it counter-clockwise will lower it in semitone
increments. The display will show a positive, negative, or zero value.
Data Control
[Assignable]
NOTE
To reassign the Data Control knob for Voice Selection, press the
Voice / Function button and then press the Eb2 key. (This procedure
is illustrated at the beginning of the

Master Tuning(F#2)

Pressin g this key will set the Data Control knob to raise or lower ( fine-tune )
the Master Tune setting of the piano.
Press the [Voice/Function] button to enter Edit Mode.
Voice / -
Function
Press the Master Tuning key (F#2).
The LED display will momentarily show:
Edit Mode section.)
F#2
21