Advertisement
9/12
Increasing contact life span
To increase the life span of your contacts and protect the unit from potential damage by reverse-
EMF, connect:
A clamping diode in parallel with each inductive DC load
An RC snubber circuit in parallel with each inductive AC load
Analog inputs
Note: Shields should be connected at the signal source.
Analog Input wiring, current
2 or 3-wire, AN0 and AN1
Analog Input wiring, voltage
Note: If either I6 or I7 is wired as an npn digital input, the remaining input may not be wired as an
analog input.
JZ10-11-R16/V, AN2 and AN3
Riga
tel. +371 6738 1617
klinkmann@klinkmann.lv
Helsinki
tel. +358 9 540 4940
automation@klinkmann.fi
Yekaterinburg
tel. +7 343 287 19 19
yekaterinburg@klinkmann.spb.ru
Vilnius
tel. +370 5 215 1646
post@klinkmann.lt
4-wire, AN0 and AN1
JZ10-11-R16V, AN0 and AN1
St. Petersburg
tel. +7 812 327 3752
klinkmann@klinkmann.spb.ru
Samara
tel. +7 846 273 95 85
samara@klinkmann.spb.ru
Tallinn
tel. +372 668 4500
klinkmann.est@klinkmann.ee
Moscow
tel. +7 495 641 1616
moscow@klinkmann.spb.ru
Кiev
tel. +38 044 495 33 40
klinkmann@klinkmann.kiev.ua
Мinsk
tel. +375 17 200 0876
minsk@klinkmann.com
Advertisement
