Turning on your balance (warm up)
The balance must be
prior to any calibration and use. The balance should then
For operating and set up videos as well as a complete user's manual - go to our Eclipse support page:
www.adamequipment.com/EclipseSupport
External Calibration
Put on weight matching desired calibration weight
100g
Weight removal is automatically detected
✓
Calibration complete
plugged into the mains power and turned on for a minimum of 12
Cal
g
Weight is automatically deteced
and calibration begins
g
12 Hour
Warm Up
be calibrated before use.
g
Remove the calibration weight
g
hours,
Select
100g
g