H3C WA2620-AGN Installation Manual page 7

Figure 2 Diagram of ceiling bracket
Slider
Ceiling bracket
Table 1 Description of WA2620-AGN interfaces
Feature Description
The Ethernet port provides a 10/100/1000
BASE-T Ethernet connection to a switch.
Use a suitable Category 5 cable with
Ethernet Port
straight-through wiring and standard RJ-45
connectors to connect your AP to the
network.
The LEDs indicate power and activity. See
LEDs
Checking the LED Indicators for details.
The AP has three built-in internal antennas.
Antenna
In addition, three RSMA antenna
Connectors connectors allow you to connect optional
external antennas.
Reset Button To reset the AP.
Provides a serial interface to the AP for
RJ-45 Console
diagnostic use. Default: 9600K, 8 bits, no
Port
parity, 1 stop bit.
Wall-Mounting
The combined wall-mounting bracket and
Bracket and
table-top stand allows you to mount the
Table-Top
unit on a wall or stand it on a table top.
Stand
The Suspended ceiling bracket (Ceiling
Suspended
bracket and Slider) allows you to mount
ceiling bracket
the unit on a suitably ceiling tile separator.
Dimensions (length x width x depth): 7 x 3 x
4 mm (0.28 x 0.12 x 0.16 in.) ,and a
Security slot
standard Kensington lock is
recommended.
7