Unable To Pair Bass Module With Soundbar - Bose ACOUSTIMASS 300 Owner's Manual

T R O U B L E S H O O T I N G

Unable to pair bass module with soundbar

If you are unable to pair the bass module with the soundbar, you can also connect the
module to the soundbar using a 3.5 mm stereo cable (not provided).
Note: If you don't have a 3.5 mm stereo cable (commonly used for headphones and
mobile devices), contact Bose® customer service to receive this part. Refer to
the contact sheet in the carton. You can also purchase this part at your local
electronics store.
1. Connect one end of a 3.5 mm stereo cable to the ACOUSTIMASS IN connector on
the back of the bass module.
2. Connect the other end of the cable to the ACOUSTIMASS connector on the back of
the SoundTouch® 300 soundbar.
3. Check for sound (see page 11).
2 2 - E N G L I S H