Finishing Setup; Checking For Sound - Bose ACOUSTIMASS 300 Owner's Manual

Checking for sound

1. Power on your TV.
2. If you are using a cable/satellite box or other secondary source:
• Power on this source.
• If your secondary source is connected to your TV, select the appropriate TV input.
If you have not programmed the SoundTouch® 300 remote control, you may need
to use a different remote control.
3. Power on your SoundTouch® 300 soundbar.
You should hear sound coming from the bass module.
Note: If you do not hear sound from the bass module, see "Troubleshooting" on
page 20.
F I N I S H I N G S E T U P
E N G L I S H - 1 1