Performing A Control Test - Accu-Chek MOBILE User Manual

7.2

Performing a control test

Downloaded from www.Manualslib.com manuals search engine
Start as for a blood glucose test: either open the tip
cover or select Test in the Main menu.
The following description assumes that you start the
test by opening the tip cover.
1 Place your finger on the corrugated area on the tip
cover and push in the direction of the arrow as far
as it will go.
After overcoming a slight resistance, the tip cover
clicks into place.
Be careful not to touch the tape when doing this
as this could damage it.
If the meter was turned off, it now turns on.
Checking the meter 7
177