Advertisement
8. Configure the IP Address for LP-8x4x
There are two methods of assigning the LP-8x4x network settings. The first
uses DHCP and the other uses a manually Assigned IP address. The factory
default setting for the LP-8x4x is DHCP, and this is the easiest method. However,
if your network system does not include a DHCP server, then you will need to
manually configure the network settings by using the Assigned IP method. To do
this:
Boot the device and establish a connection to the LP-8x4x via Telnet.
Type in 'vi /etc/network/interfaces' to open the network setting file.
9. Technical Support
If any of these items are missing or damaged, contact the local distributors for
more information. Save the shipping materials and cartons in case you want to
ship in the future.
Our service email account :
LP-8x4x website:
http://www.icpdas.com/products/PAC/linpac-8000/introduction.htm
service@icpdas.com
service.icpdas@gmail.com
- 11 -
Advertisement
