hsr-benelli S SERIES User Manual page 78

Change the engine oil only when the engine oil is warm.
4.2.13 Oil change procedure:
Remove the dip stick.
For sucking oil off an oil exhaust pump, put the suction hose as far as possible into the engine.
• Suck the oil out of the engine completely, and place it into a suitable container.
• Take of the old oil filter
• Before the installation of the new oil filter, coat the O-ring slightly with engine oil.
• Install the oil filter and tighten only to the prescribed tightening torque.
• Remove the blow by hose and open the hose clamp with a screw driver.
Caution
HSR-BENELLI SERIES-S Manual | EN -