hsr-benelli S SERIES User Manual page 73

4.2.6 Setting of steering cable
• Hold the steering in straight forward position.
• The distance of the jet nozzle to the jet drive outlet must be the same on the left and the
right side. Otherwise, adjust the steering cable accordingly.
• To disconnect the steering cable from the jet nozzle at the ball joint, you must first pull
the steering cable back. Then, pull up on the connection. The cable will be free from the
connection.
• Loosen the counter nut at the end of the steering cable on the right-hand side.
• Keep the steering always in straight forward position.
• Turn the cable connection to adjust the steering.
• Apply a liquid glue to the nut before adjusting and tightening it.
• Apply it to the counter nut too after it has been adjusted correctly.
3
- EN | HSR-BENELLI SERIES-S Manual