hsr-benelli S SERIES User Manual page 72

4.2.4 Setting of throttle cable play
The throttle mechanism must have some play. Measure the distance covered by the throttle
lever before the engine reacts to the acceleration. The play should be of about 2-3 mm
2-3 mm
4.2.5 Setting of throttle
Loosen the counter nuts at the end of the throttle cable. Then, turn them until the required play
is achieved. Tighten the counter nuts again.
You can also adjust the throttle cable play by opening the counter nuts on the handle bar Turn
them until the required free play is achieved. Tighten the counter nut after.
2
HSR-BENELLI SERIES-S Manual | EN -