Removing the water filter
If a new water filter is not inserted, the
"Water filter" function must be
deactivated.
Select "Water filter" in the menu
1.
settings.
Select and confirm the "remove"
2.
setting.
Remove the water filter from the
3.
water tank.
Re-insert the water tank.
4.
The appliance is ready for use again.
Frost protection
A service programme to prevent frost
damage during transportation and
storage. This programme completely
empties the appliance. The appliance
must be ready for use.
Press the rotary selector to start the
1.
programme.
Empty the water tank and re-insert it.
2.
The appliance emits steam.
3.
Empty the drip tray and thoroughly
4.
clean the appliance.
The appliance can now be transported
or stored.
Menu settings en
25