Dispensing Hot Water; Adjusting Beverage Settings - Siemens TI 905 Series User Manual

To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.

Dispensing hot water

Before dispensing hot water,
Note:
clean the milk system and remove the
milk container. If the milk system is not
cleaned, the dispensed water may
contain small quantities of milk.
~ "Cleaning the milk system"
on page 27
:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
The appliance is switched on. The water
tank has been filled.
Place a cup under the outlet system.
1.
Button Function
Selecting the coffee
"
strength, ground coffee
milk Milk/coffee mixing ratio
Cup size
ml
Two cups at once
#
Navigation Water temperature*
button, left
Navigation aromaIntense*
button, right
* Only available in "barista mode"
Remove the milk container, if
2.
connected.
Select "Hot water" with the rotary
3.
selector.
To change the settings for the
4.
selected drink

~ "Adjusting beverage settings"

on page 17
To begin dispensing the drink, press
5.
the rotary selector.
Hot water is dispensed into the cup.
To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
Selection
very mild*
■
mild
■
mild +*
■
normal
■
normal +*
■
strong
■
strong +*
■
very strong
■
Setting share of milk in %
(only for coffee drinks with milk)
Adjustment of the volume in ml increments.
Not available for ristretto.
Place two cups under the outlet.
e.g. for tea drinks:
> 70°C (white tea)
■
> 80°C (green tea)
■
normal
■
intense
■
Operating the appliance en
very strong +*
■
extra strong
■
aromaDoubleShot
■
strong
aromaDoubleShot
■
strong +
aromaDoubleShot
■
strong ++*
Ground coffee
■
> 85°C (rooibos tea)
■
> 90°C (black tea)
■
> 97°C (fruit tea)
■
intense +
■
17