Key Guard; Battery Recharge And Replacement - EnGenius DuraFon User Manual

Key Guard

1. To prevent accidental dialing, you can press
soft key, then press "1" to select Key Guard option. The
handset keypad is now locked. No key entry is accepted.
2. To unlock the keypad, press
within 2-seconds, press the digit
3. Once returning back to standby mode for 15-seconds, the
Key Guard will be automatically enabled.
4. Key Guard is in effect until unlocked.

Battery Recharge and Replacement

1. Charge the battery when one or several of the following happen:
a. Phone beeps twice (every 60-seconds in talk mode, every 10-minutes in
standby mode).
b. Battery icon is empty.
c.
Phone does not respond when a power On/Off key
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2. You can replace the handset battery after placing the call -in-progress on hold
and press
replacing the battery and powering on the handset.
3. Battery talk time and standby times vary depending on the talk/standby
pattern and the operating distance. Putting the handset back on the charger
cradle as often as possible is recommended for best performance.
Use only the manufacturer's provided battery and charger!
UNLOCK
key. To retrieve the call on hold, press Talk key again after
MENU
(Left) soft key, then,
＊
to unlock.
~35~
(Right)
Locked
No new calls
UNLOCK
Press * to
confirm unlock
is pressed.