Hand-Look Quilt Stitch; Straight Stitch With Auto Tie-Off Function; Inserting Zippers And Piping - Singer SEQS-6700 Instruction Manual

INSERTING ZIPPERS AND PIPING

Use the zipper foot to sew to the right or left of the zipper or to
sew close to a cord.
INSERTING ZIPPERS
To sew down the right side, attach left side of zipper foot to
presser foot holder so that the needle passes through the
opening on the left side of the foot.
To sew down the left side, attach right side of foot to foot
holder.
PIPING
Attach the right side of the zipper foot to the foot holder so that
the needle passes through the right side of the zipper foot.
forming seam tape for the piping.
Helpful Hint: Slight adjusting of the needle position to
sew closer to the piping may be accomplished with
the Stitch Width Control.

HAND-LOOK QUILT STITCH

This stitch is designed to look like hand sewing for topstitching
and quilting.
1. Thread bobbin with desired top stitching color.
2. Thread the needle with either invisible thread or with thread
that is a color which blends in with the fabric color, so it
doesn't show.
3. To obtain the desired appearance for this stitch, increase
the tension using the Thread Tension Control button found
on the front panel of the machine. When pressing the +
side of this button, the bar illustration on the LCD screen
will move up to show an increase in tension.
4. Set the stitich length at 4 (maximum).
5. Start to sew.
STRAIGHT STITCH WITH AUTO
TIE-OFF FUNCTION
1. Press the foot control and the machine will sew 4 stitches
forward and then 4 stitches in reverse and continue to sew
forward until the foot control is released.
2. Press the reverse button and the machine will sew 4
stitches in reverse and then 4 stitches in forward and stop.
Needle to left of foot
02
16
Needle to right of foot
21