SEQS-6000
Feature
Benefit
No need for multiple machines in your sewing room.
4-in-1 Sewing, Embroidery,
One machine, four functions—sewing, embroidery, quilting
Quilting and Serging
and serging.
Simply guide the thread directly from the spool to the needle
SwiftSmart™
area through a single groove and thread the needle by
Threading System
pressing the threading lever for easy needle threading.
Continue to sew while you fill another bobbin. No need to stop
Independent Bobbin Winder
sewing to refill a bobbin.
No need to pull up the bobbin thread manually. Simply insert
Drop & Sew™ Bobbin System
the bobbin, place the thread in the channel and start sewing.
Plenty of room for your biggest projects with 8.25 inches from
Long Arm Design
the needle to the tower.
Hoop size of over 6" x 10", multi-hooping capabilities and an
Extra-Large Embroidery Field
easy snap-on style hoop makes embroidering large projects
simple and straight forward.
Large multiple hoop embroidery designs can be easily created
Multi-Hooping Capabilities with
on screen providing the sewer with the capability to precisely
Fabric Positioning System
match stitches and designs.
Unplug the foot control, press the Start button and the
Electronic Auto Pilot
machine sews. You are still in complete control over the speed
- just slide the Speed Limiting Lever to the desired speed.
Stitch length and width is set for twin needle stitching simply
Automatic Twin
by pushing a button. Create impressive and dramatic
Needle Function
decorative top stitching.
1
Need help?
Do you have a question about the FUTURA QUARTET SEQS-6000 and is the answer not in the manual?
Questions and answers
How do i thread the machine
To thread the Singer Futura Quartet SEQS-6000 sewing machine:
1. Raise the presser foot lifter and the needle to its highest position.
2. Hold the thread with your right hand and thread the machine with your left hand.
3. Hook the thread onto the thread guide on the needle bar and pull it toward you, leaving about 4 inches (10 cm) of thread.
4. Insert the thread into twin thread guides labeled A and B.
5. Gently pull the thread into the thread cutter/holder to cut and hold it in place.
This process prepares the machine for automatic needle threading.
This answer is automatically generated
How do I thread the macine