Safety Hints - CDA CD 66 User Operating Instructions Manual

Figure 13

Safety Hints

1. Never put aluminium foil or plastic
DISTORTED
2. Make sure that the hob is clean before
PANBASE
WRONG
3. Remember that the plates will remain
4. Before you switch the hob on, make
DISTORTED
PANBASE
WRONG
5. Pan handles should never protrude
LEVEL 6. Do not use pans with rough bases as
PANBASE
7. DO NOT use the hob if the glass
CORRECT
8. Do not lean over the cooking plate
WRONG
WASTING
9. Follow the cleaning instructions
POWER
10. Always ensure that the base of your
11. Never use the glass surface for
WRONG
WASTING
12. WARNING:
POWER
CORRECT
COMPLETE USE
OF THE HEAT
materials on the ceramic surface when
the hob is hot.
you use it.
hot for approximately half an hour after
the plate has been switched off.
sure that you know which knob
controls the required hot plate. We
advise you to set the pan over the
cooking plate before switching it on.
over the front of the worktop. This will
ensure that children cannot reach
them.
these may scratch the hob surface.
surface is broken or cracked in any
way. Please disconnect the appliance
from the mains and contact our After-
Sales Service.
when in use.
carefully.
saucepan is clean and dry before
placing on the hob.
storage.
Hobs become very hot with use,
and retain their heat for a long time
after cooking has finished (about 30
minutes).
Children should be supervised at all
times and be prevented from
touching the hot surfaces until such
time as the appliance has cooled.
13