Parts identification
Front
Back
A Main body
1 System outer foil
2 Foil frame
3 Foil frame release buttons
4 Cleaning shutter
5 Finger rest
6 Side terminals
7 Power switch
To turn the shaver on and
off and also lock and
unlock the power switch.
8 Switch lock lamp (
)
9 Charge status lamp (
: Inner blades
; Trimmer
Trimmer handle
6
Outer foil section
System outer foil release buttons
Water inlet
B AC adaptor (RE7-87)
Adaptor
Power plug
Cord
Appliance plug
C Charging stand (RC9-84)
Charging terminals
Stand socket
Accessories
)
D Carrying holder
E Cleaning brush
F Oil
Operation and display of the switch lock
►Locking the power switch
1. Press the power
switch once and
then release.
• The shaver
starts operating.
The switch lock
lamp is off.
2. Press the power
3. Release the
switch for more
power switch.
than 2 seconds
when the shaver
is operating.
• The shaver will
stop operating.
The switch lock
The switch lock
lamp will light up.
lamp will turn off
after 5 seconds.