Charging The Shaver - Panasonic es-st29 Operating Instructions Manual

Charging the shaver

You can charge the shaver with the carrying holder attached.
1
1
Insert the appliance plug into
the stand socket.
2
2
Insert the shaver in the charging stand as
illustrated.
• The shaver will not charge unless the side terminals (a)
are in contact with the charging terminals (b).
• Wipe off any water droplets on the side terminals.
3
3
Plug in the adaptor into a household outlet and
check that the charge status lamp (
• Charging is completed after approx. 1 hour.
The charging time may decrease depending on the
charging capacity.
• Charging the appliance after each use will not affect the
battery life.
8
1
The charge status
• After charging is completed, turning the power switch ON with
• Recommended ambient temperature for charging is 10 – 35 °C.
3


• When charging the shaver for the first time or when it has not
2
• If there is noise from radio or other source while using the
4
4
) glows.
Note
You cannot operate the shaver while charging.
After charging is
While charging
completed
The charge status
lamp ( ) glows lamp (
red.
the shaver plugged in will cause charge status lamp (
up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
It may take longer to charge or the battery may fail to charge
properly in extremely high or low temperatures.
The charge status lamp ( ) will blink twice every second when
there is a problem with charging.
Charge the shaver within the recommended ambient temperature
range.
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
shaver, move to a different location to use the shaver.
Disconnect the adaptor after charging is
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Abnormal
charging
The charge status
lamp ( ) will blink
) turns
twice every
off.
second.
) to light
)