Using The Shaver - Panasonic es-st29 Operating Instructions Manual

Using the shaver

1
1
Press the power switch.
• The power cannot be turned on when the switch lock lamp
( ) blinks, as the power switch is locked.
Press the power switch for more than 2 seconds to unlock.
(See pages 6 and 7.)
2
2
Hold the shaver as illustrated
and shave.
• Start shaving by applying gentle
pressure to your face. Stretch your
skin with your free hand and move the
shaver back and forth in the direction
of your beard. You may gently increase
the amount of pressure as your skin
becomes accustomed to this shaver.
Applying excessive pressure does not
provide a closer shave.
You can also use a pen grip to hold the
shaver.
► Using the trimmer
Slide the trimmer handle up. Place at a
right angle to your skin and move
downwards to trim your sideburns.
► Notes
• Before shaving, check that the cleaning shutter is closed.
• Place your finger on the finger rest while in use. Keeping your
finger placed on the power switch during use may accidentally
lock the power switch or turn the shaver OFF.
• Do not use shaving creams or face cleansers containing
scrubbing compounds as these may cause the outer foil to clog.
• The appliance may not operate in an ambient temperature
approximately 5 °C or lower.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
• The shaving sensor may not respond depending on the type and
quantity of the shaving gel or the quantity of the foam. This is not
abnormal.
Reading lamps when using
When the battery capacity is low
The charge status lamp ( ) blinks once every
second when operating the shaver.
• You can shave 2 to 3 times after the charge status lamp (
blinks. (This will differ depending on usage.)
• A full charge will supply enough power for approx. 14 shaves of
3 minutes each.
)
9