Cleaning With The Brush - Panasonic es-st29 Operating Instructions Manual

Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the
outer foils.
3. Raise the trimmer and apply a drop
of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the outer
foils with a soft cloth.

Cleaning with the brush

► Cleaning with the long brush
Clean the system outer foil (a),
the shaver body (b) and the
trimmer (c) using the long
brush.
► Cleaning with the short brush
Clean the inner blades using the short brush by
moving it in direction (A).
• Do not move the short brush in direction (B) as it
will damage the inner blades and affect their
sharpness.
• Do not use the short brush to clean the outer
foils.
2 3
  
(A)
(B)
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
► Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
► Attaching the outer foil section
After turning the water inlet surface to the front,
securely attach the outer foil section to the shaver
until it clicks.
► Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the water inlet surface and the
system outer foil mark ( ) and securely
attach together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
► Replacing the inner blades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they
click.
2
1
1
1 2
11