Cleaning The Shaver - Panasonic es-st29 Operating Instructions Manual

Cleaning the shaver

Clean the housing with a soft cloth slightly dampened with tap
water or soapy tap water. Do not use thinner, benzine, alcohol or
other chemicals.
1. Remove the shaver from the charging stand.
2. Apply some hand soap and some water to the
outer foil.
• Close the cleaning shutter.
3. Turn the shaver on.
There are two ways to clean the shaver, depending on the
actual dirt level.
▼
10
2
▼
▼
▼
To remove light dirt
4. Slide the cleaning shutter
until it clicks.
5. Clean the outer foil section
with running water.
6. Turn the shaver off.
• Rinse with water and
shake up and down several
times to remove the water.
• Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section and the
shaver completely in a shaded area.
• The outer foil section will dry faster if
removed from the main body.
9. Attach the outer foil section to the
shaver.
10. Lubricate the shaver. (See page 11.)
▼
To remove heavy dirt
4. Turn the shaver off after
10 – 20 seconds.
5. Remove the outer foil section
and turn the shaver on.
6. Clean the shaver and the
outer foil section with
running water.
• Rinse with water and
shake up and down several
times to remove the water.
▼