Defender CA6000 Owner's Manual page 9

Lift up Stop
permanently deactivate CO Alarm when
END-OF-LIFE signals are initiated
CO Concentration and Response Time
400ppm :
(C) Activation switch is not initially in ON position
Lift up Stop
permanently deactivate CO Alarm when
END-OF-LIFE signals are initiated
CO Concentration and Response Time
400ppm :
(D) Alarm is activated when switch is in ON position
If the activation switch is not set to ON position, as in diagram (D), the mounting hole at
top of alarm will be blocked, and the CO alarm will not be activated.
The models CA6000 and CA6050 are a sealed lithium battery powered wall mounted
alarm. Two lithium battery cells are permanently sealed with soldered connections, and
cannot be removed.
batteries will power the alarm for a minimum of five years under normal operation.
and slide to left to
4- 15 minutes
and slide to left to
4- 15 minutes
No battery replacement is required, and the factory sealed
Mounting hole is closed when
switch is in initial position
To activate CO Alarm, slide the
alarm down onto mounting plate, or
slide to STOP.
Mounting hole is open when
switch is in ON position
To activate CO Alarm, slide the
alarm down onto mounting plate, or
slide to STOP.
- 9 -