Selecting An Input Signal - Hitachi CP-WU8700 User Manual

Operating

Selecting an input signal

1.
Press INPUT button on the projector.
Each time you press the button, the projector
switches its input port from the current port as
below.
LAN  COMPUTER IN  HDMI 1
VIDEO
SDI*  HDBaseT  DisplayPort
NOTE
• If you have set SKIP to some ports from SOURCE SKIP in the
OPTION menu, the input from the ports cannot be selected (87).
• While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking the ports in above order repeatedly till an input signal is
detected (87).
1.
Press COMPUTER 1, VIDEO, LAN, HDMI 1 / 2, DisplayPort, HDBaseT or
SDI button on the remote control.
The port corresponding to each button is selected as below.
Button
COMPUTER 1
COMPUTER 2
VIDEO
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
DisplayPort
HDBaseT
SDI
DIGITAL
NOTE
• While ON is selected for AUTO SEARCH item in OPTION menu,
the projector will keep checking every port sequentially till an input signal is
detected (87).
* CP-WU8700 only
38
HDMI 2
Ports
COMPUTER IN
-
VIDEO
LAN
-
-
HDMI 1
HDMI 2
DisplayPort
HDBaseT
SDI*
-
SHADE
INPUT button
Buttons for input
ports