Option Menu - Hitachi CP-WU8700 User Manual

OPTION menu

From the OPTION menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
SOURCE SKIP
AUTO SEARCH
* CP-WU8700 only
(continued on next page)
The ports can be set to be ignored in searching by the AUTO
SEARCH function (below) or in selecting by buttons on the control
panel.
CP-WU8600/CP-WX8650
CP-WX8750/CP-X8800
(1) Choose a picture input port using the ▲/▼ buttons.
(2) Using the ◄/►buttons turns on/off the SOURCE SKIP function.
NORMAL ó SKIP
The port that is set to SKIP will be ignored.
• It is not possible to set SKIP to all ports at the same time.
• This setting is not valid when in the PbyP /PinP mode (53).
Using the ▲/▼ buttons turns on/off the automatic signal search
function.
ON ó OFF
When the ON is selected, detecting no signal automatically cycles
through input ports in the following order. The search is started from
the current port. Then when an input is found, the projector will stop
searching and display the image.
LAN ð COMPUTER IN ð HDMI 1

VIDEO

SDI* ï HDBaseT ï DisplayPort
Description
CP-WU8700

HDMI 2

OPTION menu
87