Adjusting The Projector's Elevator; Installation Angle - Hitachi CP-WU8700 User Manual

Operating

Adjusting the projector's elevator

Lengthening or shortening the length
of the elevator feet shifts the projection
position and the projection angle.
Turn the elevator feet each to adjust
their length.
5°
5°
WARNING
lengthened exceeding the limit may come off and drop the projector down, and
result in an injury or damaging the projector.
CAUTION
5 degrees. The projector leaned exceeding the limit could cause malfunction and
shorten the life of the projector.

Installation angle

10°
10°
10° 10°
40
►Do not lengthen the elevator feet exceeding 30 mm. The foot
►Do not place the projector with an inclination exceeding
max. 30mm
Lamp side
Vertical and horizontal direction
in portrait mode
The projector may be installed at
horizontal angle of ±10°.
The projector may be installed at
vertical angle of ±10°.
NOTE
projector must face upward for
vertical installations.
• If Other Error has occurred,
please check the installation.
Install the projector correctly and
restart it.
• When using portrait mode, the
service life of a lamp becomes
shorter.
• The lamp side of the