Audio Menu - Hitachi CP-WU8700 User Manual

AUDIO menu

AUDIO menu
From the AUDIO menu, items shown in the table below
can be performed. Select an item using the ▲/▼ cursor
buttons, and press the ► cursor button or the ENTER
button to execute the item. Then perform it according to
the following table.
Item
VOLUME
SPEAKER
AUDIO SOURCE
80
Using the ◄/► buttons adjusts the volume of the audio output.
Low ó High
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON ó OFF
When OFF is selected, the built-in speaker does not work.
While the image signal from the input port chosen in step (1) is
projected, the audio signal from the input port selected in step
(2) is output to both the AUDIO OUT port and built-in speaker of
this projector. However, the built-in speaker does not work when
SPEAKER is set to OFF.
CP-WU8600/CP-WX8650
CP-WX8750/CP-X8800
(1) Choose a picture input port using the ▲/▼ buttons.
Choose AUDIO OUT STANDBY to select the sound output in the
standby mode.
(2) Select an audio input port or the mute icon using the ◄/► buttons.
The icons indicate the following;
No.1: AUDIO IN1 port
No.3: HDMI 1 port
No.5: DisplayPort
No.7: LAN port
• Audio input from port Nos.3 to 7 can only be selected by each of
the picture input ports and AUDIO OUT STANDBY.
• C.C. (Closed Caption) is automatically activated when
and an input signal containing C.C. is received. This function is
available only when the signal is NTSC for VIDEO or COMPUTER
IN, and when AUTO is selected for DISPLAY in the C.C. menu under
the SCREEN menu (86).
Description
CP-WU8700
No.2: AUDIO IN2 port
No.4: HDMI 2 port
No.6: HDBaseT port
: mutes the sound
is selected