Hitachi CP-WU8700 User Manual page 119

Regarding the indicator lamps (continued)
Indicator Status
SHADE
Red
SHADE
Blinking at the
same time
SHADE
Blinking
alternately
Blinking at the
same time
(continued on next page)
There is a possibility that the interior portion
has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of
Red Red
the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Please use the unit within the temperature range.
NORMAL MODE: 0 to 40°C
ECO MODE: 0 to 45°C
• Is the setting for ALTITUDE appropriate?
• Is the exhaust air (hot/cold) from peripheral
equipments blowing against the ventilation opening
of projector?
For details on ALTITUDE, refer to ALTITUDE of
SERVICE in the OPTION menu. If the projector is
used with a wrong setting, it may cause damage to
the projector itself or the parts inside.
Red
It is time to clean the air filter.
Please turn the power off immediately, and clean or
change the air filter referring to the section Cleaning
and replacing the air filter. After cleaning or
changing the air filter, please be sure to reset the
filter timer.
After the remedy, restart the projector.
Red
Red
Other error has occured.
• Please use the unit within the temperature range.
NORMAL MODE: 0 to 40°C
ECO MODE: 0 to 45°C
If the same indication is displayed after the remedy,
please contact your dealer or service company.
or
Regarding the indicator lamps
Description
119