Shift Button Chart - Arturia beatstep pro User Manual

Example 2
Original size Action
32 steps SHIFT+>>
Example 3
Original size Action
7 steps SHIFT+>>
SHIFT+>>
SHIFT+>>
To make the pattern an intermediate length, use the LST STEP button and the Step
buttons as described in section

7.4 SHIFT button chart

The SHIFT button allows you to access important features in each mode. Some are
shared between the two step sequencers, some are shared between all three
sequencers, and some are also shared with Control Mode.
Here's a chart indicating which SHIFT functions are available in which mode:
MODE SHIFT+
SEQ1 or 2 Pad 1-8
SEQ1, 2 or Pad 9-11
DRUM
SEQ1, 2 or Step button 1
DRUM
SEQ1, 2 or
DRUM
SEQ1, 2 or PAD 12
DRUM
SEQ1, 2 or PAD 13-16
DRUM
All TAP/METRO
All RATE/FINE
All PLAY
48
New size
48 steps
New size
14 steps
28 steps
44 steps
4.3.5 (SEQ1/SEQ2) and section
Function
Sets the input scale for the encoders
Sets the playback direction of the current SEQ or
DRUM pattern
Clears the data in the current SEQ or DRUM pattern.
Sets everything to default values (see
>> Extends the length of the sequence
Changes the time division of the selected sequence
to Triplet
Changes the time division of the selected sequence
Toggles the sending of metronome data ON or OFF
Increments or decrements the tempo to the 100th
decimal place.
Restart the 3 sequencers to the beginning of their
sequences, quantized to the next DRUM step
Reason
Steps 1-16 were copied / appended to step 33
Reason
Steps 1-7 were copied / appended to step 8
Steps 1-14 were copied / appended to step 15
Steps 1-16 were copied / appended to step 29
ARTURIA – BeatStep Pro – USER'S MANUAL
5.2.6 (Drum mode).
section 3.3.3)