Table of Contents
Advertisement
12 USING MIDI CONTROL CENTER
The built-in MIDI Control Center manual has general descriptions of the features that are
common to all Arturia products. To learn how to access the manual, see
This chapter will cover only the MIDI Control Center features that are unique to the
BeatStep Pro.
12.1
Device Projects
12.1.1 The Working Memory
The currently active project on the BeatStep Pro is known as the Working Memory. It
includes all of the patterns from the sequencers, the Control Mode settings, and the
Project-level settings for Swing %, etc.
Each of these features is given its own Tab in the middle of the MIDI Control Center
application. We'll cover the Tabs in
12.1.2 Project list
The left side of the MIDI Control Center window shows a list containing the Working
Memory and Projects 1-16. When one of the Projects is selected from the list the MIDI
Control Center can recall that Project from the internal memory of the BeatStep Pro and
place it into the Working Memory. See
12.1.3 Resizing the window
To see a larger number of the Projects in the Device Projects list, click and drag the
window resizing button:
60
section
12.4.
section 12.3
for instructions about this.
ARTURIA – BeatStep Pro – USER'S MANUAL
section
11.5.
Advertisement
Table of Contents
