Table of Contents
Advertisement
GENERAL ASSEMBLY INSTRUCTIONS
A Philips head screw driver is required for assembly.
1
5b
10
WARNING:
DO NOT PLUG IN POWER CORD TO POWER SOCKET, MAKE SURE PLUG
IS DISCONNECTED BEFORE ASSEMBLING THE WET AND DRY VACUUM CLEANER
UNPACKING YOUR WET AND DRY VACUUM CLEANER & GENERAL ASSEMBLY
4. Remove the contents from inside the container, make sure you have all contents as listed on
5. With the power head removed, turn the container upside down. Insert the feet with casters into
6. Insert the handle into the slots located on the top of the power head and secure it with the
installation.
10.Place the power head back on the container, and secure into place using the 2 side latches.
11.Secure the large end of the hose into the vacuum port on the container and lock into place.
2
3
6
7
11
12
4
8
13
5
5a
9
Advertisement
Table of Contents
