Table of Contents
Advertisement
GENERAL ASSEMBLY INSTRUCTIONS
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram. If any part is missing or damaged, do not attempt to assemble
the product. Contact customer service for replacement parts.
Estimated Assembly Time: 25 minutes
Tools Required for Assembly: Drill, Screwdriver
Helpful Tools: Level
1
6
11
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.
MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC.
UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY
1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. Undo the latches. (fig. 2)
3. Lift the power head off the collection tank. (fig. 3)
4. Remove the contents from inside the collection tank; make sure you have all contents as listed
on page 5. (fig. 4)
5. Insert the handle into the slots located on the top of the power head and secure it with the
screws provided. Do not over-tighten the screws. (fig. 5)
2
1
2
7
13
12
4
3
8
9 9
6
5
10
Advertisement
Table of Contents
