Wet Vacuum Operation - Vacmaster VQ1115P Operator's Manual

WET-VACUUM OPERATION
1
LIQUID VACUUMING
WARNING:
BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED
'SAFETY INSTRUCTIONS & WARNINGS'. DO NOT VACUUM IN AREAS WITH FLAMMABLE
GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS
INCLUDE BUT ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS,
OIL-BASE PAINTS, GASOLINE, ALCOHOL OR AEROSOL SPRAYS. EXPLOSIVE DUSTS
INCLUDE BUT ARE NOT LIMITED TO; COAL, MAGNESIUM, GRAIN OR GUN POWDER. TO
REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM
TOXIC MATERIALS.
WARNING:
DO NOT PLUG IN POWER CORD TO POWER SOCKET. MAKE SURE PLUG
IS DISCONNECTED BEFORE CHANGING AND CLEANING FILTERS.
container is clean and free from dust and dirt.
on page 10.
DO NOT USE THE CLOTH FILTER FOR LIQUID VACUUMING.
DO NOT USE A DUST COLLECTION BAG FOR LIQUID VACUUMING.
OPERATING INSTRUCTIONS – WET VACUUMING
IMPORTANT!
When vacuuming large quantities of liquids, do not immerse the nozzle
machine, disconnect from power supply, and drain the liquid into a suitable receptacle or drain. To
After wet vacuuming, turn the machine off and remove plug from power supply. Empty the
container, clean and dry the inside and outside before storage.
REMEMBER!
installed before dry vacuuming again.
3
2
4
7
5