Connecting; Connecting To A Pc; Download Print Drivers - Brady BMP 61 User Manual

Connecting

Connecting to a PC

Download Print Drivers

®
BMP 61 Label Printer User's Manual
®
The BMP 61 Label Printer is
equipped with a USB port to connect
to a computer and a USB host port to
be used with a flash drive. Labels
created in various applications (such
as LabelMark™ Labeling Software or
Brady Mobile Software) can be
®
printed on the BMP 61. You can also
copy data files and graphics between
printers by placing the files on a flash
drive which can be connected
®
directly to the BMP 61 printer.
In order to send data from a Brady PC labeling program to the BMP
you must install the BMP
Product CD enclosed with your BMP
The BMP ® 61 printer is a "plug-and-play" printer which means your PC will
automatically recognize the new hardware (printer) when it is attached and will
launch a wizard that will auto-install the printer drivers.
To install the printer drivers:
1. Insert the Product CD into the CD drive
of your computer.
2. Attach the small end of the USB cable to
the printer, then the flat end of the cable
to the PC.
3. Turn the printer on.
On the PC, "Found New Hardware" pops up
in the lower right corner of the screen and
the printer driver wizard is launched.
4. Follow the prompts in the printer driver wizard.
You can also download the print drivers from the Brady website, such as
www.bradyid.com, or your local site. On the website, choose
Support>Downloads, then follow the instructions on the screen.
®
61 printer driver. The printer drivers can be found on the
®
61 printer package.
Connecting
®
61 printer,
1-11