Brady BMP 61 User Manual page 164

Replacing the Printer (Media Well) Cover
Internal Components
Problem
Program
File incompatible with installed
media
Incompatible Media for chosen
application
Invalid terminal repeat value
entered.
No applications available
7-12
Cause
A saved file (or power off file)
was designed for media not
currently installed.
The labels installed cannot
accommodate the application
requirements. (E.g., attempting to
run a 110-Block application on
die cut media.)
The value entered is out of the
range.
Applications not selected
Corrective Action
Install correct media.
Install correct media.
The acceptable range is between
the minimum of 0.2 inch to the
maximum of 40 inches.
Ensure that the desired
applications are activated.
1. Press Setup.
2. Choose Apps.
3. Navigate to the desired
applications and press [OK]
to place a checkmark in front
of each application.
4. Navigate to the OK button
and press [OK].
®
BMP 61 Label Printer User's Manual