Brady BMP 61 User Manual page 29

3. If using anything but a 2-inch width
media, slide the media guide to the left
until it fits snugly up against the media
roll and clicks into place.
5. With the Power on, press Feed button once to feed media under printhead.
6. Close the cover by pushing down on it until it snaps into place.
®
BMP 61 Label Printer User's Manual
4. Feed the leading edge of the media roll
through the guide slots until it stops.
Note: Make sure the printhead is engaged by
flipping the printhead lock lever forward (to the
left) before inserting media into guides.
Media
1-17