Brady BMP 61 User Manual page 34

Attaching the Strap
5. Weave the loose end of the strap back
over the first (lower) ring, then under
and through the second (top) ring.
7. Slip your hand through the strap to
provide a secure grip when holding the
printer.
1-22
6. Pull the loose end of the strap until it
feels tight, then press the scratch (burr)
fastener against the strap so it lays flat.
8. Or, use the third D-ring at the bottom of
the printer to hang the printer on a pole
or hooked device.
®
BMP 61 Label Printer User's Manual