You can select from the following functions:
-
BLAST CHILLING *
-
BLAST CHILLING HARD *
-
BLAST FREEZING HARD
Every function cycle can be preceded by pre-cooling; please check the paragraph 4.6 "Pre-cooling". It
is used to cool down the internal room of the blast chiller to +5°C before placing product in the
machine. To activate the pre-cooling cycle, press and hold the
Each selected program will pass automatically into the CONSERVATION phase at the end of the
cycle. The conservation phase will reach +2°C when BLAST CHILLING and -20°C when BLAST
FREEZING.
The machine's memory will store all the time and temperature parameters modified from default, even
if the machine has been unplugged.
Pressing the
display the time remaining until cycle completion
BLAST CHILLING (0°C)
Make sure the device is "on"
*
Press the
BLAST CHILLING key. The LED
You can modify the default temperature setting of 0°C by, pressing the key
▼
the key
to decrease the temperature. (This option is active only before starting the program.)
Press the key ON/OFF to start the BLAST CHILLING
The BLAST CHILLING phase will last 90 minutes.
You can modify the time of the BLAST CHILLING phase by pressing the key
▼
key
to decrease the time. (This option is active only after having started the program)
Once completing the 90 minute cycle, the device will pass into conservation (setpoint 2°C)
BLAST CHILLING HARD (-20°C)
Please make sure the device is "on."
*
Press the key
Press the key HARD/SOFT: the LED HARD will flash
Press the key ON/OFF to start the BLAST CHILLING hard cycle
The phase of BLAST CHILLING phase will last 90 minutes.
I can modify the time of the BLAST CHILLING phase by, pressing the key
▼
to decrease the time. (This option is active only after having started the program)
Once 90 minute cycle has concluded, the device will pass into conservation (setpoint 2°C)
Distributed By:
***
*
BLAST CHILLING or
BLAST CHILLING: the LED
*
BLAST CHILLING key for 1 second.
***
BLAST FREEZEING key during a normal cycle will
will flash
will flash
Street:5C Wendy Ct. Greensboro, NC 27409▪Mailing: PO Box 18542,
Greensboro, NC 27419▪P:336-856-2919▪F:336-217-8838
Email:Sales@AdvancedGourmet.com▪Web:www.AdvancedGourmet.com
▲ to
increase the temperature or
▲
to increase the time or the
▲
to increase the time or the key
P a g e | 8
Need help?
Do you have a question about the JOF ONE and is the answer not in the manual?