3V: Connecting To The Power Supply; Advice For Proper Use Of The Equipment; General Operation; 5I: Pre-Cooling - Techfrost JOF ONE Owner's Manual

Always connect blast chiller/freezer to an electrical supply that matches data plate. Connect the unit only to
energy sources that are properly grounded. Do not damage the power cord (danger of electric shock). If it is
damaged, it must be replaced immediately by a qualified electrician.
CAUTION: the manufacturer shall not be held responsible for damage or accidents caused by negligence
due to the non-observance of the recommendations and regulations given or of the local governing
standards and laws regarding electrical safety.
Before using the Chiller remove all traces of glue using a detergent as there might be traces of condensate due to
final testing in the factory.
Efficiency when chilling and freezing depends on the following factors:
Simply turn the machine "ON" to the desired mode to precool the internal parts prior to use.
The core probe shall be properly positioned in the core of the thicker portion of the product. Its point shall
neither come out nor touch the pan. The probe shall be cleaned before starting any cycle, in order to prevent
contaminations. *PLEASE NOTE, YOUR PARTICULAR MACHINE MAY/MAY NOT HAVE A CORE
PROBE*
Do not cover pans or other containers with lids or insulating films. The more the surface of the product is
exposed to the air circulating in the cell, the less it will take to chill and deep freeze it.

Do not layer the products on top of one another

Make sure they are not thicker than 1.97in. thick.

Do not overload the unit beyond the quantity recommended by the manufacturer.

Allow a sufficient space between the pans in order to permit the proper air circulation

Do not put too many pans on one side of the unit. Distribute them evenly.
The chilled and/or frozen product shall be covered and protected (film, airtight, hermetic sealing) after chilling
or freezing.
Functions of the blast chiller/Freezer:
Preliminary Instructions-
As soon as the machine is connected, it is in OFF position. Press and hold the ON/OFF Key to turn the machine
ON.
Distributed By:

3v: CONNECTING TO THE POWER SUPPLY

4) ADVICE FOR PROPER USE OF THE EQUIPMENT

5) GENERAL OPERATION

5i: PRE-COOLING

5ii: CORE PROBE (Optional)

5iii: LIDS AND CONTAINERS

5iv: POSITIONING OF THE PRODUCT

5v: CONSERVATION

5vi:STANDARD USE INSTRUCTIONS

Street:5C Wendy Ct. Greensboro, NC 27409▪Mailing: PO Box 18542,
Greensboro, NC 27419▪P:336-856-2919▪F:336-217-8838
Email:Sales@AdvancedGourmet.com▪Web:www.AdvancedGourmet.com
P a g e | 7