The temperature hard blast chilling cycle and conservation are distinguished by the followings three phases:
hard blast chilling phase
blast chilling
conservation.
When the first phase ends the device automatically passes to the following one.
To start the cycle, please operate as follows:
1.
Make sure that the device is "on."
2.
Make sure that the keyboard is not jammed and that a procedure is not in progress.
3.
Press and release the BLAST CHILLING key: the LED
4.
Press and release the HARD / SOFT key: the LED HARD will flash.
5.
5a. If the parameter r19 is set to 0, the display will show the work setting from the blast chilling cycle. It is
also possible to set this value through the parameter r7.
5b. If the parameter r19 is set to 1, the display will show the blast chilling end temperature. It is also
possible to set this value through the parameter r3.
5c. Please press and release the UP key or the DOWN key within 15 s to modify the value of the
parameter.
The temperature blast freezing cycle and conservation cycle are distinguished by the followings two phases:
blast freezing
conservation
When the first phase ends, the device automatically passes to the following one.
To start the cycle, please operate as follows:
1.
Make sure that the device is "on."
2.
Make sure that the keyboard is not jammed and that a procedure is not in progress.
3.
Press and release the BLAST FREEZING key: the LED
flash.
4
4a.
If the parameter r19 is set to 0, the display will show the work setting from the blast freezing cycle. It is
also possible to set this value through the parameter r8.
4b.
If the parameter r19 is set to 1, the display will show the end blast freezing temperature. It is also
possible to set this value through the parameter r4.
4c.
Press and release the UP key or the DOWN key within 15 seconds to modify the value of the
parameter.
Distributed By:
8iii: HARD BLAST CHILLING AND CONSERVATION
8iv: BLAST FREEZING AND CONSERVATION
will flash.
, the LED
Street:5C Wendy Ct. Greensboro, NC 27409▪Mailing: PO Box 18542,
Greensboro, NC 27419▪P:336-856-2919▪F:336-217-8838
Email:Sales@AdvancedGourmet.com▪Web:www.AdvancedGourmet.com
and the LED HARD will
P a g e | 14
Need help?
Do you have a question about the JOF ONE and is the answer not in the manual?